New Method Marking

New Method Steel Stamps, Inc.

Please see www.newmethod.com for more info on New Method Steel Stamps, Inc.

Secondary marking operations of parts are costly. Obviously, the most economical and efficient way to identify your products is to do it prior to or, during the manufacturing cycle automatically, making it a primary operation. This avoids extra tooling and setup time as well as production time. All New Method automatic roll marking attachments, whether designed for use in OD or END-FACE marking, eliminate secondary marking operations, for they are engineered to work as an integral part of the machine and operate like other Screw Machine or Turning Center tools - advancing, marking the part and clearing it during the machine cycle.

National ACME - Automatic Roll Marking Tools

Normal Mount
machine	position	model
3-1/2" RB-6	5	604-1
4" RB-6	1,2,4	678-2
4" RB-6	5,3,6	678-1
3/4" RA-8	4,5	620
1-1/4" RB-8	1,5	604-2
1-1/4" RB-8	4,6,8	604-1
1-5/8" RBN-8	1,3,5	604-2
1-5/8" RBN-8	4,6,7	604-1
1-5/8/2" RB-8	1	705-2
1-5/8/2" RB-8	3	604-2
1-5/8/2" RB-8	4	705-1
1-5/8/2" RB-8	5	705-2
1-5/8/2" RB-8	6	604-1
1-5/8/2" RB-8	8	678-1
3-1/2" RB-8	4,6,8	678-1
4" RB-8	1,3,5	678-2
4" RB-8	4,6,8	678-1
5-1/4" RA-6	1,4	604-2
7/16" RA-6	All	523
9/16" RA-6	Double Deck 1-2	695
9/16" RA-6	2,3,4,5	620
9/16" RAN-6	3,5	620-1
9/16" RAN-6	2,4	620-2
1" RA-6	2,3,4,5	617
1" RA-6	1	642-1
1" RA-6	6	642-2
1-1/4" RA-6	1,2,4	604-2
1-1/4" RA-6	3,5,6	604-1
2-3/8" HSC	All	725
1-5/8/2" RB-6	1	705-2
1-5/8/2" RB-6	2,4	681-2
1-5/8/2" RB-6	3,5	681-1
1-5/8/2" RB-6	6	705-1
2-5/8" RB-6	1,4	678-2
2-5/8" RB-6	2	604-2
2-5/8" RB-6	5	604-1
2-5/8" RB-6	3,6	678-1
3-1/2" RB-6	1,4	678-2
3-1/2" RB-6	3,6	678-1
3-1/2" RB-6	2	604-2
5-1/4" RB-6	6	604-1

Outside Die Mount*
machine	position	model
3-1/2" RB-6	5	604-1-O
4" RB-6	1,2,4	678-2-O
4" RB-6	5,3,6	678-1-O
3/4" RA-8	1	621-2-O
3/4" RA-8	4,5	620-O
1-1/4" RB-8	1,5	604-2-O
1-1/4" RB-8	4,6,8	604-1-O
1-5/8" RBN-8	1,3,5	604-2-O
1-5/8" RBN-8	4,6,7	604-1-O
1-5/8/2" RB-8	1	705-2-O
1-5/8/2" RB-8	3	604-2-O
1-5/8/2" RB-8	4	705-1-O
1-5/8/2" RB-8	5	705-2-O
1-5/8/2" RB-8	6	604-1-O
1-5/8/2" RB-8	8	678-1-O
3-1/2" RB-8	4,6,8	678-1-O
4" RB-8	1,3,5	678-2-O
4" RB-8	4,6,8	678-1-O
5-1/4" RA-6	1,4	604-2-O
7/16" RA-6	All	523-O
9/16" RA-6	Double Deck 1-2	695-O
9/16" RA-6	2,3,4,5	620-O
9/16" RAN-6	3,5	620-1-O
9/16" RAN-6	2,4	620-2-O
1" RA-6	2,3,4,5	617-O
1" RA-6	1	642-1-O
1" RA-6	6	642-2-O
1-1/4" RA-6	1,2,4	604-2-O
1-1/4" RA-6	3,5,6	604-1-O
2-3/8" HSC	All	725-O
1-5/8/2" RB-6	1	705-2-O
1-5/8/2" RB-6	2,4	681-2-O
1-5/8/2" RB-6	3,5	681-1-O
1-5/8/2" RB-6	6	705-1-O
2-5/8" RB-6	1,4	678-2-O
2-5/8" RB-6	2	604-2-O
2-5/8" RB-6	5	604-1-O
2-5/8" RB-6	3,6	678-1-O
3-1/2" RB-6	1,4	678-2-O
3-1/2" RB-6	3,6	678-1-O
3-1/2" RB-6	2	604-2-O
5-1/4" RB-6	6	604-1-O

*Outside Die Mount for marking within 1/32" of collet

New Britain - Automatic Roll Marking Tools

Normal Mount
machine	position	model
#52	1	602-2*
#52	2,3,4	602-1
#52	5	602-1*
#51	1	602-2*
#51	2,3,4	602-1
#51	5	602-1*
#60	1,3,4	602-1
#60	5	549
#61	1,4	601-2
#61	3	601-1
#61	5	547
#62	1,4	601-2
#62	2,3,5	601-1
#81	All	602-1

*Mirror image adapter #2002

Outside Die Mount*
machine	position	model
#52	1	602-2-O*
#52	2,3,4	602-1-O
#52	5	602-1-O
#51	1	602-2-O*
#51	2,3,4	602-1-O
#51	5	602-1-O*
#60	1,3,4	602-1-O
#60	5	549-O
#61	1,4	601-2-O
#61	3	601-1-O
#61	5	547-O
#62	1,4	601-2-O
#62	2,3,5	601-1-O
#81	All	602-1-O

*Outside Die Mount for marking within 1/32" of collet

Davenport - Automatic Roll Marking Tools

machine	position	model
Model B	All	513
Model B	All	632

513 takes solid die
632 takes solid roll die and type retainer

Cone - Automatic Roll Marking Tools

Normal Mount
machine	position	model
1" GTC B	All	713
1", 1-3/4", 1-5/8	All	512
2"	All	512
2-1/4"-6	All	503
2-1/4"-8	All	508
2-5/8"-8	All	503
3-1/4"-8	All	503
3-1/2"-6	All	508
4"-6	All	508

Outside Die Mount*
machine	position	model
1" GTC B	All	713-O
1", 1-3/4", 1-5/8	All	512-O
2"	All	512-O
2-1/4"-6	All	503-O
2-1/4"-8	All	508-O
2-5/8"-8	All	503-O
3-1/4"-8	All	503-O
3-1/2"-6	All	508-O
4"-6	All	508-O

*Outside Die Mount for marking within 1/32" of collet.

Wickman - Automatic Roll Marking Tools

Normal Mount
machine	position	model
5/8"-6	1,4	714-2
5/8"-6	2,3,5	714-1
1"-6	1,4	668-2
1"-6	2,3,5	668-1
1"-8	1,5	668-2
1"-8	2,6	668-1
1"-8	3,7	807
1-3/8"; 1/3/4"-6	All	652
2-5/8"; 3/1/4"-6	1,4,6	678-2
2-5/8"; 3/1/4"-6	2,3,5	678-1
3-1/2"-1	Rear	678-1
6-5/8"-6	1,4	705-2
6-5/8"-6	2,3,5	705-1

*Outside Die Mount for marking within 1/32" of collet.

Outside Die Mount*
machine	position	model
5/8"-6	1,4	714-2-O
5/8"-6	2,3,5	714-1-O
1"-6	1,4	668-2-O
1"-6	2,3,5	668-1-O
1"-8	1,5	668-2-O
1"-8	2,6	668-1-O
1"-8	3,7	807-O
1-3/8"; 1/3/4"-6	All	652-O
2-5/8"; 3/1/4"-6	1,4,6	678-2-O
2-5/8"; 3/1/4"-6	2,3,5	678-1-O
3-1/2"-1	Rear	678-1-O
6-5/8"-6	1,4	705-2-O
6-5/8"-6	2,3,5	705-1-O

*Outside Die Mount for marking within 1/32" of collet.

Warner & Swasey - Automatic Roll Marking Tools

Normal Mount
machine	position	model
1-3/4"-2-1/4"-5	All	652
3/4"- 1-1/4"-6	All	652
1SC	All	500-C
1AC	Front	690
2AB	Front	667
2AC	Front	667

Outside Die Mount for marking within 1/32" of collet.

Outside Die Mount*
machine	position	model
1-3/4"-2-1/4"-5	All	652-O
3/4"- 1-1/4"-6	All	652-O
1SC	All	553
1AC	Front	690-O
2AB	Front	667-O
2AC	Front	667-O

*Outside Die Mount for marking within 1/32" of collet.

Brown & Sharpe - Automatic Roll Marking Tools

Normal Mount
machine	position	model
00G	F or R	523
00G	Vertical	536
0G	F or R	529
0G	Vertical	605
2G	F or R	530
2G	Vertical	686
ULTRA	Vertical	686RS

Outside Die Mount*
machine	position	model
00G	F or R	523-O
00G	Vertical	536-O
0G	F or R	529-O
0G	Vertical	605-O
2G	F or R	530-O
2G	Vertical	686-O
ULTRA	Vertical	686RS-O

*Outside Die Mount for marking within 1/32" of collet.

CNC Turning Centers - Automatic Roll Marking Tools

Normal Mount
machine	position	model
All	All	500-C
All	All	951-TH
All	All	951-D
All	All	815-VDI

Outside Die Mount
machine	position	model
All	All	553
All	All	951
All	All	815-0-VDI

Tools clearance required: 1/2"
Model 500-C must have a tool overhang clearance of 3".
Standard shank size for Models 951 is 3/4" or 1" sq.
Model 951-D can be used to mark O.D. and endface.

Tools clearance required: 1/2"
Model 553 must have a tool overhang clearance of 3".
Standard shank size for Models 951 is 3/4" or 1" sq.

Greenlee - Automatic Roll Marking Tools

Normal Mount
Machine	Position	Model
1"-6	All	688
1-5/8-4	All	644
1-5/8-6	All	644
2"-6	All	644

Outside Die Mount*
Machine	Position	Model
1"-6	All	688-O
1-5/8-4	All	644-O
1-5/8-6	All	644-O
2"-6	All	644-O

*Outside Die Mount for marking within 1/32" of collet.

Radial End Face Attachments - Automatic Roll Marking Tools

An all-purpose precision automatic roll marker that can mark any material being machined, including high-tensile steel, brass, aluminum and plastics as well as such production parts as races, cups, cones etc.

900 series roll marking attachments can be equipped with threaded shanks to permit direct in-line mounting with reference to true pitch diameter, transferring numbers of characters from the cone of the die to the flat end face of the part. Moreover, by using a flat die, Model 900 Series holders will do angular marking on a part while holding absolutely true prospective dimensions.